ABB free@home - SmartHome App

The free@home app makes programming and operation of a free@home home automation system possible.

In the configuration area of the app the visualization of the home is created, logic connections between sensors and actuators established, and scenes and time profiles created.

In the operating area of the app the actuators of the system can be remote controlled on the basis of the previously created visualization.

The switchover between the two areas is carried out with the "Toothed-wheel" icon at the top right in the app.

Procedure:

1. Install the "free@home" app on your terminal device.

2. Check whether the left LED of the System Access Point lights up green.

3. If necessary, press the left button and wait until the LED lights up

permanently.

4. In the network settings of your terminal device, set the radio network on "SysAPXXX".

The terminal device will now connect itself directly with the System Access Point.

5. Start the "free@home" app.

6. Tip on your user name and enter your password. If this is your first login, enter the password you have chosen twice.

The app automatically finds the System Access Point of the free@home system, which must be located in the same network, and stores the password. Information about the network settings is located in the 'BRIEF INSTRUCTIONS FOR USERS' which is enclosed with the System Access Point.

Preconditions:

- free@home home automation system including System Access Point

- From iOS7

For an optimum user experience we recommend an iPhone 5 (S/C) and an iPad Air or iPad Mini Retina.

- From Android 4.4

For versions < 4.4 we recommend the use of the Chrome browser.

</div> <div class="id-app-translated-desc" style="display:none">免费@ home的应用程序，使得一个自由@ home的家庭自动化系统的编程和操作成为可能。

在应用程序的配置区域家庭的可视化创建，传感器和执行器建立，场景和时间创建配置文件之间的逻辑连接。

在应用程序的运行区域中的系统的致动器可以被远程控制的先前创建的可视化的基础上。

这两个区域之间的切换是用右上角的应用程序中的“齿轮”图标。

步骤：

1，安装“自由@家”应用程序的终端设备上。

2，检查左侧的系统接入点的LED是否亮起绿色。

3，如果有必要，按下左键，等到LED补光灯

永久。

4，在你的终端设备的网络设置，在“SysAPXXX”设置无线网络。

该终端设备将现在本身直接与系统接入点进行连接。

5，启动“免费@家”的应用程序。

6，提示您的用户名并输入密码。如果这是您第一次登录，输入您已选择两次密码。

该应用程序会自动寻找空闲@ home的系统，它必须位于同一网络的系统接入点，并存储密码。有关网络设置的信息位于“简要说明，供用户这是随附于系统接入点。

前提条件：

- 包括系统接入点免费@ home的家庭自动化系统

- 从IOS7

为了达到最佳的用户体验，我们建议一个iPhone 5（S / C）和一个iPad空气或iPad的迷你视网膜。

- 从Android 4.4

对于版本<4.4，我们建议使用Chrome浏览器。</div> <div class="show-more-end">